This is a new old stock rose gold metal 12 size perfect dial that measure 37.6 mm from side to side and feet positions at 10 minutes past the hour, 24.9 minutes past and 12 minutes to 12. These have never been put on a watch and I have had them for over 20 years. Have a few to sell.

This looks to be original dial in perfect condition. Measures 26.5 mm from outside to outside. The numbers on the dial back are U42 with a star and 181. The feet are at 26 minutes past the hour and 7.5 minutes to the hour and they are 19 mm apart and about 6 mm from the outside edge of the dial to the center of the feet.

About one year ago I had this dial made for a watch but must have sold it before dial was sent back from refinish so I don’t need it anymore and maybe you do. Two tone silver finish with shiny yellow gold numbers. Measures 27 mm from side to side and the feet are at 12 minutes past and 17.5 minutes to the 12.

Swiss hunting case watch. This 18 size 15 jewel manual wind lever set movement is marked "The Plan Watch" it has a good balance but broken mainspring so it is not running and would be a good project for a watchmaker. White porcelain dial with black Roman numerals and fancy gold hands is marked "The Plan Watch". Fancy low grade yellow gold filled hinged case is mostly brass with a decorative star design around the outside of both outer covers with a flower design in the center of the back cover and a shield in the center of the front cover. Size 54 mm. not counting the bow area. Selling As Is.

G.C.T. 4992B black 24 hour pocket watch dial. This one has the dial and the original movement plate. Fits 12 size watch so it measures 43 mm from side to side. Condition is excellent with just a few surface scratches.

Cal 562 8 day Pocket Watch Movement for parts, this looks like 18 size as it measures 47.5 mm from side to side and 11.5 mm thick. Missing parts but there are many parts you may need someday if you ever have one of these. Serial number on both sides of this movement is 41314418 so it was made in 1942 and l think it was used in the military. Anyway if you can use it for parts.